From d9d36fc09996ed8c2574f9336c3594aa3cc56941 Mon Sep 17 00:00:00 2001 From: Jelmer Vernooij Date: Wed, 21 Dec 2005 13:13:10 +0100 Subject: Add initial draft of BitlBee schema --- doc/bitlbee.schema | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 doc/bitlbee.schema (limited to 'doc') diff --git a/doc/bitlbee.schema b/doc/bitlbee.schema new file mode 100644 index 00000000..47d5e706 --- /dev/null +++ b/doc/bitlbee.schema @@ -0,0 +1,27 @@ +## LDAP Schema file for BitlBee +## +## We need the following object classes and related attributes: +## bitlBeeNick: +## - nick +## - password +## - setting (multiple values) +## +## bitlBeeAccount: +## - protocol (msn, oscar, jabber, yahoo, ...) +## - username +## - password +## - server name +## +## bitlBeeBuddy: +## - nick +## - handle + +## each bitlBeeNick has zero or more bitlBeeAccount subentries +## and bitlBeeAccount entries contain zero or more bitlBeeBuddy entries + +## The admin needs to setup the LDAP server to: +## - allow anonymous users to auth against bitlBeeNick objects on the +## password field +## - allow anonymous users to create new objects that start with nick= +## - allow read/write for a user that is authenticated only to his/her own +## object and subentries -- cgit v1.2.3 From a323a22773714a19254db34156500a67e5916451 Mon Sep 17 00:00:00 2001 From: Jelmer Vernooij Date: Sun, 12 Feb 2006 20:25:31 +1300 Subject: Add autoconnect property --- doc/bitlbee.schema | 1 + 1 file changed, 1 insertion(+) (limited to 'doc') diff --git a/doc/bitlbee.schema b/doc/bitlbee.schema index 47d5e706..9fc6895c 100644 --- a/doc/bitlbee.schema +++ b/doc/bitlbee.schema @@ -11,6 +11,7 @@ ## - username ## - password ## - server name +## - autoconnect (true/false) ## ## bitlBeeBuddy: ## - nick -- cgit v1.2.3 From d5dfc3d7ff2756a5991356bb643630fa7b03f8d9 Mon Sep 17 00:00:00 2001 From: Jelmer Vernooij Date: Fri, 24 Mar 2006 17:48:00 +0100 Subject: Start working on LDAP schema (OID's still need to be filled in) --- doc/bitlbee.schema | 65 +++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 54 insertions(+), 11 deletions(-) (limited to 'doc') diff --git a/doc/bitlbee.schema b/doc/bitlbee.schema index 9fc6895c..795f5854 100644 --- a/doc/bitlbee.schema +++ b/doc/bitlbee.schema @@ -1,17 +1,7 @@ ## LDAP Schema file for BitlBee +## Copyright (C) 2006 Jelmer Vernooij ## ## We need the following object classes and related attributes: -## bitlBeeNick: -## - nick -## - password -## - setting (multiple values) -## -## bitlBeeAccount: -## - protocol (msn, oscar, jabber, yahoo, ...) -## - username -## - password -## - server name -## - autoconnect (true/false) ## ## bitlBeeBuddy: ## - nick @@ -26,3 +16,56 @@ ## - allow anonymous users to create new objects that start with nick= ## - allow read/write for a user that is authenticated only to his/her own ## object and subentries + +## - userid +## - userPassword +## - setting (multiple values) +## depends: top, account + +#FIXME: Unique OID + +attributetype ( 1.3.6.1.4.1.7165.2.1.24 NAME 'bitlBeeAutoConnect' + DESC 'Autoconnect setting' + EQUALITY booleanMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) + +#FIXME: Unique OID + +attributetype ( 1.3.6.1.4.1.7165.2.1.24 NAME 'bitlBeeAccountNo' + DESC 'Account number' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +#FIXME: Unique OID + +objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeAccount' SUP account STRUCTURAL + DESC 'BitlBee User Account ' + MUST ( userid, userPassword ) + MAY ( ) ) + +## bitlBeeAccount: +## - accountNo 1.3.6.1.4.1.1466.115.121.1.27 +## - protocol (msn, oscar, jabber, yahoo, ...) +## - username +## - password +## - server name +## - autoconnect (true/false) 1.3.6.1.4.1.1466.115.121.1.7 +## depends: top + +#FIXME: Unique OID +objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeIMAccount' SUP account STRUCTURAL + DESC 'BitlBee IM Account ' + MUST ( bitlBeeAccountNo, userid, userPassword ) + MAY ( host, bitlBeeAutoconnect ) ) + +#FIXME: Unique OID +objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeSetting' SUP top STRUCTURAL + DESC 'BitlBee Configuration Setting' + MUST ( bitlBeeSettingName ) + MAY ( bitlBeeSettingValue ) ) + +#FIXME: Unique OID +objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeBuddy' SUP top STRUCTURAL + DESC 'BitlBee Nick Mapping' + MUST ( bitlBeeBuddyHandle ) + MAY ( ircNick ) ) -- cgit v1.2.3 From 0025b5148725e524dfdc1da57b18fcd2be2608ee Mon Sep 17 00:00:00 2001 From: Jelmer Vernooij Date: Sat, 3 Jun 2006 23:08:58 +0200 Subject: Use unique OID's and include BitlBee's OID (25873) --- doc/bitlbee.schema | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) (limited to 'doc') diff --git a/doc/bitlbee.schema b/doc/bitlbee.schema index 795f5854..3322e057 100644 --- a/doc/bitlbee.schema +++ b/doc/bitlbee.schema @@ -22,23 +22,17 @@ ## - setting (multiple values) ## depends: top, account -#FIXME: Unique OID - -attributetype ( 1.3.6.1.4.1.7165.2.1.24 NAME 'bitlBeeAutoConnect' +attributetype ( 1.3.6.1.4.1.25873.2.1.1 NAME 'bitlBeeAutoConnect' DESC 'Autoconnect setting' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) -#FIXME: Unique OID - -attributetype ( 1.3.6.1.4.1.7165.2.1.24 NAME 'bitlBeeAccountNo' +attributetype ( 1.3.6.1.4.1.25873.2.1.2 NAME 'bitlBeeAccountNo' DESC 'Account number' EQUALITY integerMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) -#FIXME: Unique OID - -objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeAccount' SUP account STRUCTURAL +objectclass ( 1.3.6.1.4.1.25873.2.2.3 NAME 'bitlBeeAccount' SUP account STRUCTURAL DESC 'BitlBee User Account ' MUST ( userid, userPassword ) MAY ( ) ) @@ -52,20 +46,17 @@ objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeAccount' SUP account STRUCTUR ## - autoconnect (true/false) 1.3.6.1.4.1.1466.115.121.1.7 ## depends: top -#FIXME: Unique OID -objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeIMAccount' SUP account STRUCTURAL +objectclass ( 1.3.6.1.4.1.25873.2.2.1 NAME 'bitlBeeIMAccount' SUP account STRUCTURAL DESC 'BitlBee IM Account ' MUST ( bitlBeeAccountNo, userid, userPassword ) MAY ( host, bitlBeeAutoconnect ) ) -#FIXME: Unique OID -objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeSetting' SUP top STRUCTURAL +objectclass ( 1.3.6.1.4.1.25873.2.2.2 NAME 'bitlBeeSetting' SUP top STRUCTURAL DESC 'BitlBee Configuration Setting' MUST ( bitlBeeSettingName ) MAY ( bitlBeeSettingValue ) ) -#FIXME: Unique OID -objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'bitlBeeBuddy' SUP top STRUCTURAL +objectclass ( 1.3.6.1.4.1.25873.2.2.3 NAME 'bitlBeeBuddy' SUP top STRUCTURAL DESC 'BitlBee Nick Mapping' MUST ( bitlBeeBuddyHandle ) MAY ( ircNick ) ) -- cgit v1.2.3 From 75a4b85ea060c5b63e9742ee9d1591bd618ba5c2 Mon Sep 17 00:00:00 2001 From: Wilmer van der Gaast Date: Fri, 14 Jul 2006 11:25:48 +0200 Subject: Fixed a memory leak, added a check for valid Jabber handles, and updated documentation (added information about "account set" and sorted the list of settings because it was a bit too random). --- doc/user-guide/commands.xml | 263 ++++++++++++++++++++++++++++---------------- doc/user-guide/help.xsl | 2 +- 2 files changed, 167 insertions(+), 98 deletions(-) (limited to 'doc') diff --git a/doc/user-guide/commands.xml b/doc/user-guide/commands.xml index 44a9882f..d28a8531 100644 --- a/doc/user-guide/commands.xml +++ b/doc/user-guide/commands.xml @@ -10,7 +10,7 @@ - Available actions: add, del, list, on, off. See help account <action> for more information. + Available actions: add, del, list, on, off and set. See help account <action> for more information. @@ -25,28 +25,28 @@ - account add jabber <handle> <password> [<servertag>] + account add jabber <handle@server.tld> <password> [<servertag>] - Note that the servertag argument is optional. You only have to use it if the part after the @ in your handle isn't the hostname of your Jabber server, or if you want to use SSL/connect to a non-standard port number. The format is simple: [<servername>[:<portnumber>][:ssl]]. For example, this is how you can connect to Google Talk: + Note that the servertag argument is optional. You only have to use it if the part after the @ in your handle isn't the hostname of your Jabber server, or if you want to use SSL/connect to a non-standard port number. The format is simple: [<servername>[:<portnumber>][:ssl]]. - - account add jabber example@gmail.com hobbelmeeuw talk.google.com:5223:ssl - Account successfully added - - - Note that Google talk is SSL-only, but officially reachable over both port 5222 and 5223. However, for some people only port 5222 works, for some people only 5223. This is something you'll have to try out. + Google Talk uses the Jabber protocol. Please note that Google talk is SSL-only, but officially reachable over both port 5222 and 5223. Usually BitlBee users have to connect via port 5223, for example like this: + + + account add jabber example@gmail.com hobbelmeeuw talk.google.com:5223:ssl + Account successfully added + - account add msn <handle> <password> + account add msn <handle@server.tld> <password> @@ -102,7 +102,7 @@ - This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts. (Including accounts awaiting a reconnection) + This command will try to log into the specified account. If no account is specified, BitlBee will log into all the accounts that have the auto_connect flag set. @@ -117,7 +117,7 @@ - This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts. (Including accounts awaiting a reconnection) + This command disconnects the connection for the specified account. If no account is specified, BitlBee will deactivate all active accounts and cancel all pending reconnects. @@ -135,6 +135,26 @@ + + + account set <account id> + account set <account id>/<setting> + account set <account id>/<setting> <value> + + + + This account can be used to change various settings for IM accounts. For all protocols, this command can be used to change the handle or the password BitlBee uses to log in and if it should be logged in automatically. Some protocols have additional settings. You can see the settings available for a connection by typing account set <account id>. + + + + For more infomation about a setting, see help set <setting>. + + + + The account ID can be a number (see account list), the protocol name or (part of) the screenname, as long as it matches only one connection. + + + @@ -275,120 +295,145 @@ - - iso8859-1 - you can get a list of all possible values by doing 'iconv -l' in a shell + + True - The charset setting enables you to use different character sets in BitlBee. These get converted to UTF-8 before sending and from UTF-8 when receiving. + With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this. - + - If you don't know what's the best value for this, at least iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://czyborra.com/charsets/iso8859.html + This setting can also be changed for specific accounts using the account set command. (However, these values will be ignored if the global auto_connect setting is disabled!) - - - True + + False - - If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in the control channel. + If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting. - This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect. + See also the auto_reconnect_delay setting. + - - True + + 300 - If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore. + Tell BitlBee after how many seconds it should attempt to bring an IM-connection back up after a crash. It's not a good idea to set this value very low, it will cause too much useless traffic when an IM-server is down for a few hours. + + + + See also the auto_reconnect setting. - + True - Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML. - - - If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to always, but this might sometimes accidentally strip non-HTML things too. + With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled. - + False - Some debugging messages can be sent to the control channel if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee. + By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data. + + + + Using the buddy_sendbuffer_delay setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent. + + + + Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases. - - ": " + + 200 - It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using set to_char. + Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds. - Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable. + See also the buddy_sendbuffer setting. - - False + + iso8859-1 + you can get a list of all possible values by doing 'iconv -l' in a shell - Sends you a /notice when a user starts typing a message (if the protocol supports it, MSN for example). This is a bug, not a feature. (But please don't report it.. ;-) You don't want to use it. Really. In fact the typing-notification is just one of the least useful 'innovations' ever. It's just there because some guy will probably ask me about it anyway. ;-) + The charset setting enables you to use different character sets in BitlBee. These get converted to UTF-8 before sending and from UTF-8 when receiving. + + + + If you don't know what's the best value for this, at least iso8859-1 is the best choice for most Western countries. You can try to find what works best for you on http://czyborra.com/charsets/iso8859.html + - - both - both, root, user, none + + False - Some people prefer themself and root to have operator status in &bitlbee, other people don't. You can change these states using this setting. + Some debugging messages can be sent to the control channel if you wish. They're probably not really useful for you, unless you're doing some development on BitlBee. + + + + + root + root, last + - The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status. + With this value set to root, lines written in the control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in the control channel, set this to last. - - True - + - With this option enabled, the root user devoices people when they go away (just away, not offline) and gives the voice back when they come back. You might dislike the voice-floods you'll get if your contact list is huge, so this option can be disabled. + Currently only available for MSN connections. This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line. + + False + + + With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name". + + + root root, add, add_private, add_channel, ignore @@ -416,134 +461,158 @@ - + True - With this option enabled, when you identify BitlBee will automatically connect to your accounts, with this disabled it will not do this. + Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer. + - - False + + both + both, root, user, none - If an IM-connections breaks, you're supposed to bring it back up yourself. Having BitlBee do this automatically might not always be a good idea, for several reasons. If you want the connections to be restored automatically, you can enable this setting. + Some people prefer themself and root to have operator status in &bitlbee, other people don't. You can change these states using this setting. - See also the auto_reconnect_delay setting. + The value "both" means both user and root get ops. "root" means, well, just root. "user" means just the user. "none" means nobody will get operator status. - - - 300 - + - - Tell BitlBee after how many seconds it should attempt to bring an IM-connection back up after a crash. It's not a good idea to set this value very low, it will cause too much useless traffic when an IM-server is down for a few hours. + Use this global setting to change your "NickServ" password. - + - See also the auto_reconnect setting. + This setting is also available for all IM accounts to change the password BitlBee uses to connect to the service. + + + + Note that BitlBee will always say this setting is empty. This doesn't mean there is no password, it just means that, for security reasons, BitlBee stores passwords somewhere else so they can't just be retrieved in plain text. - - - False - + + - - By default, when you send a message to someone, BitlBee forwards this message to the user immediately. When you paste a large number of lines, the lines will be sent in separate messages, which might not be very nice to read. If you enable this setting, BitlBee will buffer your messages and wait for more data. + Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections. + + + + + True + - Using the buddy_sendbuffer_delay setting you can specify the number of seconds BitlBee should wait for more data before the complete message is sent. + If value is true, messages from users will appear in separate query windows. If false, messages from users will appear in the control channel. - Please note that if you remove a buddy from your list (or if the connection to that user drops) and there's still data in the buffer, this data will be lost. BitlBee will not try to send the message to the user in those cases. + This setting is remembered (during one session) per-user, this setting only changes the default state. This option takes effect as soon as you reconnect. - - - 200 + + lifo + lifo, fifo - - Tell BitlBee after how many (mili)seconds a buffered message should be sent. Values greater than 5 will be interpreted as miliseconds, 5 and lower as seconds. + This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to lifo, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to fifo, BitlBee displays the first question which comes in and caches all the others until you answer the first one. - See also the buddy_sendbuffer setting. + Although the fifo setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones). + + + BitlBee + + + + Can be set for Jabber connections. You can use this to connect to your Jabber account from multiple clients at once, with every client using a different resource string. + + - - root - root, last + + True - With this value set to root, lines written in the control channel without any nickname in front of them will be interpreted as commands. If you want BitlBee to send those lines to the last person you addressed in the control channel, set this to last. + If enabled causes BitlBee to save all current settings and account details when user disconnects. This is enabled by default, and these days there's not really a reason to have it disabled anymore. + + + + + Can be set for Jabber- and OSCAR-connections. For OSCAR, this must be set to login.icq.com if it's an ICQ connection, or login.oscar.aol.com if it's an AIM connection. For Jabber, you have to set this if the servername isn't equal to the part after the @ in the Jabber handle. + + - + False - - With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name". - + + + Currently only available for Jabber connections. Set this to true if the server accepts SSL connections. + + - + + True + - Use this setting to change your "NickServ" password. + Determines what BitlBee should do with HTML in messages. Normally this is turned on and HTML will be stripped from messages, if BitlBee thinks there is HTML. + + + If BitlBee fails to detect this sometimes (most likely in AIM messages over an ICQ connection), you can set this setting to always, but this might sometimes accidentally strip non-HTML things too. - - lifo - lifo, fifo + + ": " - This changes the order in which the questions from root (usually authorization requests from buddies) should be answered. When set to lifo, BitlBee immediately displays all new questions and they should be answered in reverse order. When this is set to fifo, BitlBee displays the first question which comes in and caches all the others until you answer the first one. + It's customary that messages meant for one specific person on an IRC channel are prepended by his/her alias followed by a colon ':'. BitlBee does this by default. If you prefer a different character, you can set it using set to_char. - Although the fifo setting might sound more logical (and used to be the default behaviour in older BitlBee versions), it turned out not to be very convenient for many users when they missed the first question (and never received the next ones). + Please note that this setting is only used for incoming messages. For outgoing messages you can use ':' (colon) or ',' to separate the destination nick from the message, and this is not configurable. - - True + + False - Hereby you can change whether you want all lower case nick names or leave the case as it intended by your peer. + Sends you a /notice when a user starts typing a message (if the protocol supports it, MSN for example). This is a bug, not a feature. (But please don't report it.. ;-) You don't want to use it. Really. In fact the typing-notification is just one of the least useful 'innovations' ever. It's just there because some guy will probably ask me about it anyway. ;-) - diff --git a/doc/user-guide/help.xsl b/doc/user-guide/help.xsl index 0eb1a88b..394530a7 100644 --- a/doc/user-guide/help.xsl +++ b/doc/user-guide/help.xsl @@ -6,7 +6,7 @@ - + -- cgit v1.2.3 From 89a180978d3e5d81300b82923e8a208ee085d754 Mon Sep 17 00:00:00 2001 From: Wilmer van der Gaast Date: Fri, 14 Jul 2006 20:27:02 +0200 Subject: More documentation updates: Added a Scope: line for every setting (for per-account and global settings) and leaving out the Default: line when there is no default specified in XML (like with the display_name setting). --- doc/user-guide/Makefile | 2 +- doc/user-guide/commands.xml | 79 +++++++++++++++++++++++---------------------- doc/user-guide/help.xsl | 5 ++- 3 files changed, 46 insertions(+), 40 deletions(-) (limited to 'doc') diff --git a/doc/user-guide/Makefile b/doc/user-guide/Makefile index 98c4e99f..eb31fc0f 100644 --- a/doc/user-guide/Makefile +++ b/doc/user-guide/Makefile @@ -27,7 +27,7 @@ help.xml: commands.xml %.db.xml: %.xml docbook.xsl xsltproc --xinclude --output $@ docbook.xsl $< -help.txt: help.xml help.xsl +help.txt: help.xml help.xsl commands.xml misc.xml quickstart.xml xsltproc --stringparam extraparanewline "$(EXTRAPARANEWLINE)" --xinclude help.xsl $< | perl -0077 -pe 's/\n\n%/\n%/s; s/_b_/\002/g;' > $@ clean: diff --git a/doc/user-guide/commands.xml b/doc/user-guide/commands.xml index d28a8531..fd855360 100644 --- a/doc/user-guide/commands.xml +++ b/doc/user-guide/commands.xml @@ -295,8 +295,8 @@ - - True + + true @@ -309,8 +309,8 @@ - - False + + false @@ -320,11 +320,14 @@ See also the auto_reconnect_delay setting. - + + This setting can also be changed for specific accounts using the account set command. (However, these values will be ignored if the global auto_reconnect setting is disabled!) + + - + 300 @@ -338,8 +341,8 @@ - - True + + true @@ -348,8 +351,8 @@ - - False + + false @@ -366,7 +369,7 @@ - + 200 @@ -381,7 +384,7 @@ - + iso8859-1 you can get a list of all possible values by doing 'iconv -l' in a shell @@ -397,8 +400,8 @@ - - False + + false @@ -407,7 +410,7 @@ - + root root, last @@ -418,7 +421,7 @@ - + Currently only available for MSN connections. This setting allows you to read and change your "friendly name" for this connection. Since this is a server-side setting, it can't be changed when the account is off-line. @@ -426,15 +429,15 @@ - - False + + false With this option enabled, root will inform you when someone in your buddy list changes his/her "friendly name". - + root root, add, add_private, add_channel, ignore @@ -461,8 +464,8 @@ - - True + + true @@ -472,7 +475,7 @@ - + both both, root, user, none @@ -487,7 +490,7 @@ - + Use this global setting to change your "NickServ" password. @@ -503,7 +506,7 @@ - + Currently only available for Jabber connections. Specifies the port number to connect to. Usually this should be set to 5222, or 5223 for SSL-connections. @@ -511,8 +514,8 @@ - - True + + true @@ -525,7 +528,7 @@ - + lifo lifo, fifo @@ -540,7 +543,7 @@ - + BitlBee @@ -550,8 +553,8 @@ - - True + + true @@ -560,7 +563,7 @@ - + Can be set for Jabber- and OSCAR-connections. For OSCAR, this must be set to login.icq.com if it's an ICQ connection, or login.oscar.aol.com if it's an AIM connection. For Jabber, you have to set this if the servername isn't equal to the part after the @ in the Jabber handle. @@ -568,8 +571,8 @@ - - False + + false @@ -578,8 +581,8 @@ - - True + + true @@ -591,7 +594,7 @@ - + ": " @@ -605,8 +608,8 @@ - - False + + false diff --git a/doc/user-guide/help.xsl b/doc/user-guide/help.xsl index 394530a7..dec6a671 100644 --- a/doc/user-guide/help.xsl +++ b/doc/user-guide/help.xsl @@ -57,7 +57,10 @@ Processing setting '' ?set _b_Type:_b_ - _b_Default:_b_ + _b_Scope:_b_ + + _b_Default:_b_ + _b_Possible Values:_b_ -- cgit v1.2.3 From 0aaca60fdc1a6793b438ecc926bd937073d22685 Mon Sep 17 00:00:00 2001 From: Wilmer van der Gaast Date: Wed, 19 Jul 2006 18:52:38 +0200 Subject: Added some (more) comments to .h files in lib/ and some minor fixes/cleanups. --- doc/user-guide/commands.xml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'doc') diff --git a/doc/user-guide/commands.xml b/doc/user-guide/commands.xml index fd855360..0016d190 100644 --- a/doc/user-guide/commands.xml +++ b/doc/user-guide/commands.xml @@ -745,6 +745,10 @@ This command allows to set the friendly name of an im account. If no new name is specified the command will report the current name. When the name contains spaces, don't forget to quote the whole nick in double quotes. Currently this command is only supported by the MSN protocol. + + + It is recommended to use the per-account display_name setting to read and change this information. The nick command is deprecated. + -- cgit v1.2.3 From 846cec61f2b94be60c7bae7f4d0de8952e2d45fa Mon Sep 17 00:00:00 2001 From: Wilmer van der Gaast Date: Sun, 13 Aug 2006 21:08:38 +0200 Subject: Added help information for the web_aware setting. --- doc/user-guide/commands.xml | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'doc') diff --git a/doc/user-guide/commands.xml b/doc/user-guide/commands.xml index 0016d190..790e89f6 100644 --- a/doc/user-guide/commands.xml +++ b/doc/user-guide/commands.xml @@ -618,6 +618,20 @@ + + false + + + + ICQ allows people to see if you're on-line via a CGI-script. (http://status.icq.com/online.gif?icq=UIN) This can be nice to put on your website, but it seems that spammers also use it to see if you're online without having to add you to their contact list. So to prevent ICQ spamming, recent versions of BitlBee disable this feature by default. + + + + Unless you really intend to use this feature somewhere (on forums or maybe a website), it's probably better to keep this setting disabled. + + + + Rename (renick) a buddy rename <oldnick> <newnick> -- cgit v1.2.3 From 08cdb93834bcc1b67e4e7f44e8bc90b42c686658 Mon Sep 17 00:00:00 2001 From: Wilmer van der Gaast Date: Mon, 14 Aug 2006 15:25:05 +0200 Subject: Updated the note about encryption in the README file. --- doc/README | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) (limited to 'doc') diff --git a/doc/README b/doc/README index c82c9aeb..75988004 100644 --- a/doc/README +++ b/doc/README @@ -154,17 +154,27 @@ http://code.bitlbee.org/ A NOTE ON ENCRYPTION ==================== -BitlBee stores the accounts and settings (not your contact list though) in -some sort of encrypted/obfuscated format. - -*** THIS IS NOT A SAFE FORMAT! *** - -You should still make sure the rights to the configuration directory and -files are set so that only root and the BitlBee user can read/write them. - -This format is not to prevent malicicous users from running with your -passwords, but to prevent accidental glimpses of the administrators to cause -any harm. You have no choice but to trust root though. +There used to be a note here about the simple obfuscation method used to +make the passwords in the configuration files unreadable. However, BitlBee +now uses a better format (and real encryption (salted MD5 and RC4)) to store +the passwords. This means that people who somehow get their hands on your +configuration files can't easily extract your passwords from them anymore. + +However, once you log into the BitlBee server and send your password, an +intruder with tcpdump can still read your passwords. This can't really be +avoided, of course. The new format is a lot more reliable (because it can't +be cracked with just very basic crypto analysis anymore), but you still have +to be careful. The main extra protection offered by the new format is that +the files can only be cracked with some help from the user (by sending the +password at login time). + +So if you run a public server, it's most important that you don't give root +access to people who like to play with tcpdump. Also, it's a good idea to +delete all *.nicks/*.accounts files as soon as BitlBee converted them to the +new format (which happens as soon as the user logs in, it can't be done +automatically because it needs the password for that account). You won't +need them anymore (unless you want to switch back to an older BitlBee +version) and they only make it easier for others to crack your passwords. LEGAL @@ -191,5 +201,5 @@ also licensed under the GPL. BitlBee - An IRC to other chat networks gateway - Copyright (C) 2002-2005 Wilmer van der Gaast + Copyright (C) 2002-2006 Wilmer van der Gaast and others -- cgit v1.2.3 From 9829ae028dc1f0d8ab60cb18293234f2d4cc19b8 Mon Sep 17 00:00:00 2001 From: Wilmer van der Gaast Date: Mon, 14 Aug 2006 22:17:54 +0200 Subject: Added information about the new file format to CHANGES. --- doc/CHANGES | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'doc') diff --git a/doc/CHANGES b/doc/CHANGES index 7b95e8cb..cd100741 100644 --- a/doc/CHANGES +++ b/doc/CHANGES @@ -1,3 +1,27 @@ +Version x.x: +- Most important change: New file format for user data (accounts, nicks and + settings). Migration to the new format should happen transparently, + BitlBee will read the old files and once you quit/save it will save in the + new format. It is recommended to delete the old files (BitlBee doesn't do + this automatically, it will just ignore them) since they won't be used + anymore (and since the old file format is a security risk). Some advantages + of this file format switch: + * Safer format, since the identify-password is now salted before generating + a checksum. This way one can't use MD5 reverse lookup databases to crack + passwords. Also, the IM-account passwords are encrypted using RC4 instead + of the simple obfuscation scheme which BitlBee used so far. + * Easier to extend than the previous format (at least the .nicks format was + horribly limited). + * Nicknames for buddies are now saved per-account instead of per-protocol. + So far having one buddy on multiple accounts of the same protocol was a + problem because the nicks generated for the two "instances" of this buddy + were very unpredictable. + NOTE: This also means that "account del" removes not just the account, + BUT ALSO ALL NICKNAMES! If you're changing IM accounts and don't want to + lose the nicknames, you can now use "account set" to change the username + and password for the existing connection. + * Per-account settings (see the new "account set" command). + Version 1.0: - Removed some crashy debugging code. - QUIT command now works before logging in. (Mainly an RFC-compliancy fix.) -- cgit v1.2.3