diff options
Diffstat (limited to 'tools/README')
| -rw-r--r-- | tools/README | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/tools/README b/tools/README new file mode 100644 index 0000000..2276ebb --- /dev/null +++ b/tools/README @@ -0,0 +1,139 @@ +Outline: +------------------------------------------------------------------ + + 1 Install OS on three boxes + 2 Bootstrap: + * Install tgmanage on one, the bootstrap (tools, include, netlist.txt) + * Install dependencies on bootstrap + * Push SSH key key to the other boxes (init-sshkeys.sh) + * Update configuration + * Update netlist.txt + * Bootstrap the primary and secondary (make-base-requires.sh) + 3 Create new networks/scopes/zones Update during the party using + update-baseservice.sh from bootstrap + 4 Apply changes usling tools/apply-baseupdate.sh (reloads bind, restarts dhcpd) + 5 Changes to generated scopes, pools, zones are done on the primary, in the files + 6 If tools need patching, patch on boot and push with update-tools.sh + 7 Before wednesday evening, the infra.tgXX.gathering.org zone should be updated! + * Only use make-base-requires.sh during bootstrap !!!!!!! :P + +Detailed instructions and description: +================================================================== + +1: Install Debian +------------------------------------------------------------------ + +The following three hosts/servers are normally used: + * A 'bootstrap' box. This server will be used to configure + the first TG-servers, and may end up hosting the switch-config and NMS. + * The server to use as Primary DNS and DHCP server + * The server to use as Secondary DNS and SMTP. +Add the three hosts to /etc/hosts, DNS is not available yet... + +2: Perform bootstrapping. +------------------------------------------------------------------ + +Start by placing the 'tgmanage' directory as '/root/tgmanage' on the bootstrap +box. Change into the 'tgmanage' directory. Next, run +'tools/install-dependencies.sh boot' + + +Edit 'include/config.local.pm' and update for this year's TG. Use +'tools/create-shellconf.pl' to extract configuration from the perl module to +create/update the 'include/tgmanage.cfg.sh' configuration script. + + +The tools make extensive use of key-based SSH logins, to make this work +seamlessly, run 'tools/init-sshkeys.sh' to create an RSA priv/pub keypair, and +push the pubkey to the Primary and Secondary boxes. + + +The Network-list is _not_ automagically updated. A copy of last year's +netlist.txt should be included in the goodiebag. With that as a base, update +for this year's address plan. Remember that client nets in the hall are +supposed to be pulled from switches.txt ... +The rest of the information needed should be pulled from techwiki.g.o The +format of the file is: one net per line, lines starting with # are skipped, +format of each net-line is: +176.110.124.0 24 noc +# <network adress> <prefixlen> <network-name> + + +Run 'tools/make-base-requires.sh'. This script will log in on the Primary and +Secondary boxes, install dependencies and the BIND/DHCP packages, create all +needed directories, create the initial configuration files. + +A short listing of the tasks of scripts called by make-base-requires: +tools/install-dependencies.sh Installs needed base software to boot, primary and secondary +tools/make-named.pl Basic BIND setup (creates named.conf et.al) +tools/make-first-zones.pl Creates static zone-files (tgname, infra, ipv6zone) +tools/make-reverse4-files.pl Creates reverse-zones for IPv4 +tools/make-dhcpd.pl Sets up the base setup for DHCP +NOTE: these scripts are run by tools/make-base-requires.sh, you should not need to +run these individually + +3++: Update during the party using update-baseservice.sh from bootstrap +------------------------------------------------------------------ + +After 'tools/make-base-requires.sh' has been run, further updating should be +managed by the following three files: +tools/update-baseservice.sh Used to add/update bind and DHCP configuration +tools/apply-baseupdate.sh Used to reload bind and restart DHCP +tools/update-tools.sh Used to push changes to the tgmanage toolchain + +This means, after the base setup is completed, updating and managing the +configuration is done by updating netlist.txt and running tools/update-baseservice.sh +from the bootstrap box, or from the NMS box if the toolchain gets moved there during +the party. + +To create a new DHCP scope, add DNS forward and reverse zone for a new network: + + * Add the network to netlist.txt + * Run tools/update-baseservice.sh to generate new .conf and .zone files + * Run tools/apply-baseupdate.sh to load new configuration + +To do changes to DHCP config after the scope .conf file has been created +(read: later in the party), log in to the primary/dhcp server, and make +the changes in the appropriate .conf file .. + +To do DNS changes to the main DNS zone or the infra-zone, make the changes +in the appropriate zone file on the primary DNS server. + +To add DNS records to any other DNS zone (forward or reverse), you have +to use 'nsupdate'. To simplify the process, use tools/generate-dnsrr.pl +Usage on this tool is documented in the "header" of the script... + + +The update prosess is handled by a bunch of "sub-tools", these should typically +not need to be run individually: +tools/make-bind-include.pl Run via update-baseservice, adds new net's to DNS include +tools/make-dhcpd-include.pl Run via update-baseservice, adds new net's to DHCP include +tools/make-missing-conf.pl Run via update-baseservice, adds missing net-conf to BIND/DHCP + + +7: Generation of linknet dns content +------------------------------------------------------------------ + +Format for linknet.txt is documented in make-linknet-hosts.pl + +Generate IPv4 infra hostnames and IP address assignments +by using tools/generate-dnsrr.pl + +> cat linknet.txt | tools/make-linknet-hosts.pl | tools/generate-dnsrr.pl --domain infra.tgXX.gathering.org +Output from this shuld go in infra.tgXX.gathering.org.zone on primary + +> cat linknet.txt | tools/make-linknet-hosts.pl | tools/generate-dnsrr.pl --domain infra.tgXX.gathering.org -ns -rev +Output from this should go as input to nsupdate, see doc in generate-dnsrr.pl + + +Other stuff.... +------------------------------------------------------------------ +Files that are not used? Need to revisit these files... + +>tools/make-switch-placements.pl + +Updates positions for switches in NMS map (png) + +> tools/make-switches.pl +> tools/fetch-portlist.sh + |