Initial repository (0.99 release tree)0.99

1 files changed, 476 insertions, 0 deletions

diff --git a/protocols/jabber/xmlparse.h b/protocols/jabber/xmlparse.h
new file mode 100644
index 00000000..f39edb8c
--- /dev/null
+++ b/protocols/jabber/xmlparse.h
@@ -0,0 +1,476 @@
+/*
+The contents of this file are subject to the Mozilla Public License
+Version 1.1 (the "License"); you may not use this file except in
+compliance with the License. You may obtain a copy of the License at
+http://www.mozilla.org/MPL/
+
+Software distributed under the License is distributed on an "AS IS"
+basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+License for the specific language governing rights and limitations
+under the License.
+
+The Original Code is expat.
+
+The Initial Developer of the Original Code is James Clark.
+Portions created by James Clark are Copyright (C) 1998, 1999
+James Clark. All Rights Reserved.
+
+Contributor(s):
+
+Alternatively, the contents of this file may be used under the terms
+of the GNU General Public License (the "GPL"), in which case the
+provisions of the GPL are applicable instead of those above.  If you
+wish to allow use of your version of this file only under the terms of
+the GPL and not to allow others to use your version of this file under
+the MPL, indicate your decision by deleting the provisions above and
+replace them with the notice and other provisions required by the
+GPL. If you do not delete the provisions above, a recipient may use
+your version of this file under either the MPL or the GPL.
+*/
+
+#ifndef XmlParse_INCLUDED
+#define XmlParse_INCLUDED 1
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef XMLPARSEAPI
+#define XMLPARSEAPI /* as nothing */
+#endif
+
+typedef void *XML_Parser;
+
+#ifdef XML_UNICODE_WCHAR_T
+
+/* XML_UNICODE_WCHAR_T will work only if sizeof(wchar_t) == 2 and wchar_t
+uses Unicode. */
+/* Information is UTF-16 encoded as wchar_ts */
+
+#ifndef XML_UNICODE
+#define XML_UNICODE
+#endif
+
+#include <stddef.h>
+typedef wchar_t XML_Char;
+typedef wchar_t XML_LChar;
+
+#else /* not XML_UNICODE_WCHAR_T */
+
+#ifdef XML_UNICODE
+
+/* Information is UTF-16 encoded as unsigned shorts */
+typedef unsigned short XML_Char;
+typedef char XML_LChar;
+
+#else /* not XML_UNICODE */
+
+/* Information is UTF-8 encoded. */
+typedef char XML_Char;
+typedef char XML_LChar;
+
+#endif /* not XML_UNICODE */
+
+#endif /* not XML_UNICODE_WCHAR_T */
+
+
+/* Constructs a new parser; encoding is the encoding specified by the external
+protocol or null if there is none specified. */
+
+XML_Parser XMLPARSEAPI
+XML_ParserCreate(const XML_Char *encoding);
+
+/* Constructs a new parser and namespace processor.  Element type names
+and attribute names that belong to a namespace will be expanded;
+unprefixed attribute names are never expanded; unprefixed element type
+names are expanded only if there is a default namespace. The expanded
+name is the concatenation of the namespace URI, the namespace separator character,
+and the local part of the name.  If the namespace separator is '\0' then
+the namespace URI and the local part will be concatenated without any
+separator.  When a namespace is not declared, the name and prefix will be
+passed through without expansion. */
+
+XML_Parser XMLPARSEAPI
+XML_ParserCreateNS(const XML_Char *encoding, XML_Char namespaceSeparator);
+
+
+/* atts is array of name/value pairs, terminated by 0;
+   names and values are 0 terminated. */
+
+typedef void (*XML_StartElementHandler)(void *userData,
+					const XML_Char *name,
+					const XML_Char **atts);
+
+typedef void (*XML_EndElementHandler)(void *userData,
+				      const XML_Char *name);
+
+/* s is not 0 terminated. */
+typedef void (*XML_CharacterDataHandler)(void *userData,
+					 const XML_Char *s,
+					 int len);
+
+/* target and data are 0 terminated */
+typedef void (*XML_ProcessingInstructionHandler)(void *userData,
+						 const XML_Char *target,
+						 const XML_Char *data);
+
+/* data is 0 terminated */
+typedef void (*XML_CommentHandler)(void *userData, const XML_Char *data);
+
+typedef void (*XML_StartCdataSectionHandler)(void *userData);
+typedef void (*XML_EndCdataSectionHandler)(void *userData);
+
+/* This is called for any characters in the XML document for
+which there is no applicable handler.  This includes both
+characters that are part of markup which is of a kind that is
+not reported (comments, markup declarations), or characters
+that are part of a construct which could be reported but
+for which no handler has been supplied. The characters are passed
+exactly as they were in the XML document except that
+they will be encoded in UTF-8.  Line boundaries are not normalized.
+Note that a byte order mark character is not passed to the default handler.
+There are no guarantees about how characters are divided between calls
+to the default handler: for example, a comment might be split between
+multiple calls. */
+
+typedef void (*XML_DefaultHandler)(void *userData,
+				   const XML_Char *s,
+				   int len);
+
+/* This is called for a declaration of an unparsed (NDATA)
+entity.  The base argument is whatever was set by XML_SetBase.
+The entityName, systemId and notationName arguments will never be null.
+The other arguments may be. */
+
+typedef void (*XML_UnparsedEntityDeclHandler)(void *userData,
+					      const XML_Char *entityName,
+					      const XML_Char *base,
+					      const XML_Char *systemId,
+					      const XML_Char *publicId,
+					      const XML_Char *notationName);
+
+/* This is called for a declaration of notation.
+The base argument is whatever was set by XML_SetBase.
+The notationName will never be null.  The other arguments can be. */
+
+typedef void (*XML_NotationDeclHandler)(void *userData,
+					const XML_Char *notationName,
+					const XML_Char *base,
+					const XML_Char *systemId,
+					const XML_Char *publicId);
+
+/* When namespace processing is enabled, these are called once for
+each namespace declaration. The call to the start and end element
+handlers occur between the calls to the start and end namespace
+declaration handlers. For an xmlns attribute, prefix will be null.
+For an xmlns="" attribute, uri will be null. */
+
+typedef void (*XML_StartNamespaceDeclHandler)(void *userData,
+					      const XML_Char *prefix,
+					      const XML_Char *uri);
+
+typedef void (*XML_EndNamespaceDeclHandler)(void *userData,
+					    const XML_Char *prefix);
+
+/* This is called if the document is not standalone (it has an
+external subset or a reference to a parameter entity, but does not
+have standalone="yes"). If this handler returns 0, then processing
+will not continue, and the parser will return a
+XML_ERROR_NOT_STANDALONE error. */
+
+typedef int (*XML_NotStandaloneHandler)(void *userData);
+
+/* This is called for a reference to an external parsed general entity.
+The referenced entity is not automatically parsed.
+The application can parse it immediately or later using
+XML_ExternalEntityParserCreate.
+The parser argument is the parser parsing the entity containing the reference;
+it can be passed as the parser argument to XML_ExternalEntityParserCreate.
+The systemId argument is the system identifier as specified in the entity declaration;
+it will not be null.
+The base argument is the system identifier that should be used as the base for
+resolving systemId if systemId was relative; this is set by XML_SetBase;
+it may be null.
+The publicId argument is the public identifier as specified in the entity declaration,
+or null if none was specified; the whitespace in the public identifier
+will have been normalized as required by the XML spec.
+The context argument specifies the parsing context in the format
+expected by the context argument to
+XML_ExternalEntityParserCreate; context is valid only until the handler
+returns, so if the referenced entity is to be parsed later, it must be copied.
+The handler should return 0 if processing should not continue because of
+a fatal error in the handling of the external entity.
+In this case the calling parser will return an XML_ERROR_EXTERNAL_ENTITY_HANDLING
+error.
+Note that unlike other handlers the first argument is the parser, not userData. */
+
+typedef int (*XML_ExternalEntityRefHandler)(XML_Parser parser,
+					    const XML_Char *context,
+					    const XML_Char *base,
+					    const XML_Char *systemId,
+					    const XML_Char *publicId);
+
+/* This structure is filled in by the XML_UnknownEncodingHandler
+to provide information to the parser about encodings that are unknown
+to the parser.
+The map[b] member gives information about byte sequences
+whose first byte is b.
+If map[b] is c where c is >= 0, then b by itself encodes the Unicode scalar value c.
+If map[b] is -1, then the byte sequence is malformed.
+If map[b] is -n, where n >= 2, then b is the first byte of an n-byte
+sequence that encodes a single Unicode scalar value.
+The data member will be passed as the first argument to the convert function.
+The convert function is used to convert multibyte sequences;
+s will point to a n-byte sequence where map[(unsigned char)*s] == -n.
+The convert function must return the Unicode scalar value
+represented by this byte sequence or -1 if the byte sequence is malformed.
+The convert function may be null if the encoding is a single-byte encoding,
+that is if map[b] >= -1 for all bytes b.
+When the parser is finished with the encoding, then if release is not null,
+it will call release passing it the data member;
+once release has been called, the convert function will not be called again.
+
+Expat places certain restrictions on the encodings that are supported
+using this mechanism.
+
+1. Every ASCII character that can appear in a well-formed XML document,
+other than the characters
+
+  $@\^`{}~
+
+must be represented by a single byte, and that byte must be the
+same byte that represents that character in ASCII.
+
+2. No character may require more than 4 bytes to encode.
+
+3. All characters encoded must have Unicode scalar values <= 0xFFFF,
+(ie characters that would be encoded by surrogates in UTF-16
+are  not allowed).  Note that this restriction doesn't apply to
+the built-in support for UTF-8 and UTF-16.
+
+4. No Unicode character may be encoded by more than one distinct sequence
+of bytes. */
+
+typedef struct {
+  int map[256];
+  void *data;
+  int (*convert)(void *data, const char *s);
+  void (*release)(void *data);
+} XML_Encoding;
+
+/* This is called for an encoding that is unknown to the parser.
+The encodingHandlerData argument is that which was passed as the
+second argument to XML_SetUnknownEncodingHandler.
+The name argument gives the name of the encoding as specified in
+the encoding declaration.
+If the callback can provide information about the encoding,
+it must fill in the XML_Encoding structure, and return 1.
+Otherwise it must return 0.
+If info does not describe a suitable encoding,
+then the parser will return an XML_UNKNOWN_ENCODING error. */
+
+typedef int (*XML_UnknownEncodingHandler)(void *encodingHandlerData,
+					  const XML_Char *name,
+					  XML_Encoding *info);
+
+void XMLPARSEAPI
+XML_SetElementHandler(XML_Parser parser,
+		      XML_StartElementHandler start,
+		      XML_EndElementHandler end);
+
+void XMLPARSEAPI
+XML_SetCharacterDataHandler(XML_Parser parser,
+			    XML_CharacterDataHandler handler);
+
+void XMLPARSEAPI
+XML_SetProcessingInstructionHandler(XML_Parser parser,
+				    XML_ProcessingInstructionHandler handler);
+void XMLPARSEAPI
+XML_SetCommentHandler(XML_Parser parser,
+                      XML_CommentHandler handler);
+
+void XMLPARSEAPI
+XML_SetCdataSectionHandler(XML_Parser parser,
+			   XML_StartCdataSectionHandler start,
+			   XML_EndCdataSectionHandler end);
+
+/* This sets the default handler and also inhibits expansion of internal entities.
+The entity reference will be passed to the default handler. */
+
+void XMLPARSEAPI
+XML_SetDefaultHandler(XML_Parser parser,
+		      XML_DefaultHandler handler);
+
+/* This sets the default handler but does not inhibit expansion of internal entities.
+The entity reference will not be passed to the default handler. */
+
+void XMLPARSEAPI
+XML_SetDefaultHandlerExpand(XML_Parser parser,
+		            XML_DefaultHandler handler);
+
+void XMLPARSEAPI
+XML_SetUnparsedEntityDeclHandler(XML_Parser parser,
+				 XML_UnparsedEntityDeclHandler handler);
+
+void XMLPARSEAPI
+XML_SetNotationDeclHandler(XML_Parser parser,
+			   XML_NotationDeclHandler handler);
+
+void XMLPARSEAPI
+XML_SetNamespaceDeclHandler(XML_Parser parser,
+			    XML_StartNamespaceDeclHandler start,
+			    XML_EndNamespaceDeclHandler end);
+
+void XMLPARSEAPI
+XML_SetNotStandaloneHandler(XML_Parser parser,
+			    XML_NotStandaloneHandler handler);
+
+void XMLPARSEAPI
+XML_SetExternalEntityRefHandler(XML_Parser parser,
+				XML_ExternalEntityRefHandler handler);
+
+/* If a non-null value for arg is specified here, then it will be passed
+as the first argument to the external entity ref handler instead
+of the parser object. */
+void XMLPARSEAPI
+XML_SetExternalEntityRefHandlerArg(XML_Parser, void *arg);
+
+void XMLPARSEAPI
+XML_SetUnknownEncodingHandler(XML_Parser parser,
+			      XML_UnknownEncodingHandler handler,
+			      void *encodingHandlerData);
+
+/* This can be called within a handler for a start element, end element,
+processing instruction or character data.  It causes the corresponding
+markup to be passed to the default handler. */
+void XMLPARSEAPI XML_DefaultCurrent(XML_Parser parser);
+
+/* This value is passed as the userData argument to callbacks. */
+void XMLPARSEAPI
+XML_SetUserData(XML_Parser parser, void *userData);
+
+/* Returns the last value set by XML_SetUserData or null. */
+#define XML_GetUserData(parser) (*(void **)(parser))
+
+/* This is equivalent to supplying an encoding argument
+to XML_CreateParser. It must not be called after XML_Parse
+or XML_ParseBuffer. */
+
+int XMLPARSEAPI
+XML_SetEncoding(XML_Parser parser, const XML_Char *encoding);
+
+/* If this function is called, then the parser will be passed
+as the first argument to callbacks instead of userData.
+The userData will still be accessible using XML_GetUserData. */
+
+void XMLPARSEAPI
+XML_UseParserAsHandlerArg(XML_Parser parser);
+
+/* Sets the base to be used for resolving relative URIs in system identifiers in
+declarations.  Resolving relative identifiers is left to the application:
+this value will be passed through as the base argument to the
+XML_ExternalEntityRefHandler, XML_NotationDeclHandler
+and XML_UnparsedEntityDeclHandler. The base argument will be copied.
+Returns zero if out of memory, non-zero otherwise. */
+
+int XMLPARSEAPI
+XML_SetBase(XML_Parser parser, const XML_Char *base);
+
+const XML_Char XMLPARSEAPI *
+XML_GetBase(XML_Parser parser);
+
+/* Returns the number of the attributes passed in last call to the
+XML_StartElementHandler that were specified in the start-tag rather
+than defaulted. */
+
+int XMLPARSEAPI XML_GetSpecifiedAttributeCount(XML_Parser parser);
+
+/* Parses some input. Returns 0 if a fatal error is detected.
+The last call to XML_Parse must have isFinal true;
+len may be zero for this call (or any other). */
+int XMLPARSEAPI
+XML_Parse(XML_Parser parser, const char *s, int len, int isFinal);
+
+/* Creates an XML_Parser object that can parse an external general entity;
+context is a '\0'-terminated string specifying the parse context;
+encoding is a '\0'-terminated string giving the name of the externally specified encoding,
+or null if there is no externally specified encoding.
+The context string consists of a sequence of tokens separated by formfeeds (\f);
+a token consisting of a name specifies that the general entity of the name
+is open; a token of the form prefix=uri specifies the namespace for a particular
+prefix; a token of the form =uri specifies the default namespace.
+This can be called at any point after the first call to an ExternalEntityRefHandler
+so longer as the parser has not yet been freed.
+The new parser is completely independent and may safely be used in a separate thread.
+The handlers and userData are initialized from the parser argument.
+Returns 0 if out of memory.  Otherwise returns a new XML_Parser object. */
+XML_Parser XMLPARSEAPI
+XML_ExternalEntityParserCreate(XML_Parser parser,
+			       const XML_Char *context,
+			       const XML_Char *encoding);
+
+enum XML_Error {
+  XML_ERROR_NONE,
+  XML_ERROR_NO_MEMORY,
+  XML_ERROR_SYNTAX,
+  XML_ERROR_NO_ELEMENTS,
+  XML_ERROR_INVALID_TOKEN,
+  XML_ERROR_UNCLOSED_TOKEN,
+  XML_ERROR_PARTIAL_CHAR,
+  XML_ERROR_TAG_MISMATCH,
+  XML_ERROR_DUPLICATE_ATTRIBUTE,
+  XML_ERROR_JUNK_AFTER_DOC_ELEMENT,
+  XML_ERROR_PARAM_ENTITY_REF,
+  XML_ERROR_UNDEFINED_ENTITY,
+  XML_ERROR_RECURSIVE_ENTITY_REF,
+  XML_ERROR_ASYNC_ENTITY,
+  XML_ERROR_BAD_CHAR_REF,
+  XML_ERROR_BINARY_ENTITY_REF,
+  XML_ERROR_ATTRIBUTE_EXTERNAL_ENTITY_REF,
+  XML_ERROR_MISPLACED_XML_PI,
+  XML_ERROR_UNKNOWN_ENCODING,
+  XML_ERROR_INCORRECT_ENCODING,
+  XML_ERROR_UNCLOSED_CDATA_SECTION,
+  XML_ERROR_EXTERNAL_ENTITY_HANDLING,
+  XML_ERROR_NOT_STANDALONE
+};
+
+/* If XML_Parse or XML_ParseBuffer have returned 0, then XML_GetErrorCode
+returns information about the error. */
+
+enum XML_Error XMLPARSEAPI XML_GetErrorCode(XML_Parser parser);
+
+/* These functions return information about the current parse location.
+They may be called when XML_Parse or XML_ParseBuffer return 0;
+in this case the location is the location of the character at which
+the error was detected.
+They may also be called from any other callback called to report
+some parse event; in this the location is the location of the first
+of the sequence of characters that generated the event. */
+
+int XMLPARSEAPI XML_GetCurrentLineNumber(XML_Parser parser);
+int XMLPARSEAPI XML_GetCurrentColumnNumber(XML_Parser parser);
+long XMLPARSEAPI XML_GetCurrentByteIndex(XML_Parser parser);
+
+/* Return the number of bytes in the current event.
+Returns 0 if the event is in an internal entity. */
+
+int XMLPARSEAPI XML_GetCurrentByteCount(XML_Parser parser);
+
+/* For backwards compatibility with previous versions. */
+#define XML_GetErrorLineNumber XML_GetCurrentLineNumber
+#define XML_GetErrorColumnNumber XML_GetCurrentColumnNumber
+#define XML_GetErrorByteIndex XML_GetCurrentByteIndex
+
+/* Frees memory used by the parser. */
+void XMLPARSEAPI
+XML_ParserFree(XML_Parser parser);
+
+/* Returns a string describing the error. */
+const XML_LChar XMLPARSEAPI *XML_ErrorString(int code);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* not XmlParse_INCLUDED */