aboutsummaryrefslogtreecommitdiffstats
path: root/examples/tg16/streams/cubemap/rey-cubemap.config
diff options
context:
space:
mode:
Diffstat (limited to 'examples/tg16/streams/cubemap/rey-cubemap.config')
-rw-r--r--examples/tg16/streams/cubemap/rey-cubemap.config150
1 files changed, 150 insertions, 0 deletions
diff --git a/examples/tg16/streams/cubemap/rey-cubemap.config b/examples/tg16/streams/cubemap/rey-cubemap.config
new file mode 100644
index 0000000..7faa9a6
--- /dev/null
+++ b/examples/tg16/streams/cubemap/rey-cubemap.config
@@ -0,0 +1,150 @@
+# Uncomment to run in the background. Note that in daemonized mode, all filenames
+# are relative to an undefined directory, so you should use absolute paths for
+# error_log, stats_file, etc.
+
+#daemonize
+
+# For low-traffic servers (less than a gigabit or two), num_servers 1 is fine.
+# For best performance in high-traffic situations, you want one for each CPU.
+num_servers 1
+
+#
+# All input ports are treated exactly the same, but you may use multiple ones nevertheless.
+#
+port 80
+# listen 127.0.0.1:9095
+# listen [::1]:9095
+
+stats_file /var/lib/cubemap/cubemap.stats
+stats_interval 60
+
+input_stats_file /var/lib/cubemap/cubemap-input.stats
+input_stats_interval 60
+
+# Logging of clients as they disconnect (and as such as no longer visible in the stats file).
+# You can only have zero or one of these.
+access_log /var/log/cubemap/access.log
+
+# Logging of various informational and error messages. You can have as many of these as you want.
+error_log type=file filename=/var/log/cubemap/cubemap.log
+error_log type=syslog
+error_log type=console
+
+#
+# Now the streams! There are two types of streams; stream (HTTP output)
+# and udpstream (UDP output). Let's take stream first.
+#
+
+# A basic form of stream, with HTTP input. Often, you will need no more than this.
+# The input must be Metacube framed (VLC can produce this with an option).
+#stream /test.flv src=http://gruessi.zrh.sesse.net:4013/test.flv
+
+# Streams can share the same input (the same is reused, no extra bandwidth needed).
+# force_prebuffer=<number of bytes> is a parameter where we don't start sending
+# any data to a newly connected client before we can do that many bytes at once.
+# This is useful for clients that don't properly buffer themselves before starting
+# playing, e.g., most web browsers and some Flash players when playing from HTTP
+# (e.g., JW Player).
+#stream /test-jwplayer.flv src=http://gruessi.zrh.sesse.net:4013/test.flv force_prebuffer=1500000
+
+# encoding=metacube means the _output_ will be Metacube framed. This is useful
+# for sending on to another Cubemap instance.
+#stream /test.flv.metacube src=http://gruessi.zrh.sesse.net:4013/test.flv encoding=metacube
+
+# UDP input. TS is the most common container to use over UDP (you cannot
+# take any arbitrary container and expect it to work).
+# backlog_size=<number of bytes> overrides the backlog, which is normally 10 MB.
+# If clients fall more behind than the backlog (plus the socket buffer),
+# they will drop data, so if you have extremely high-bitrate streams, you may want
+# to increase this. Or conversely, if you have little RAM and many streams
+# (or many servers) you can decrease it.
+#stream /udp.ts src=udp://@:1234 backlog_size=1048576
+
+# An example of IPv4 multicast input. Cubemap will subscribe to the given group
+# and wait for data sent by any sender to the given port.
+# pacing_rate_kbit=<number of kilobit/sec> will ask the kernel to hard-limit
+# the TCP transfer rate, including retransmits, to the given speed. (This is a
+# no-op if you do not use the sch_fq packet scheduler, which is not the default
+# but can be set in Linux 3.13 and newer using tc.) This is extremely
+# useful for reducing packet loss and thus including throughput, since it means
+# that packets arrive smoothly instead of in tight bursts, which will often
+# overload underbuffered routers and cause drops (imagine receiving a 100 kB
+# keyframe at 10gig speeds, and then having to meter it out over 5 Mbit ADSL).
+# The rate should be a bit higher than your stream bitrate to allow for retransmits.
+#stream /udp-multicast.ts src=udp://@233.252.0.2:1234 pacing_rate_kbit=2000
+
+# IPv6 SSM (Single Source Multicast) input. Subscribes to the given group and
+# waits for packets from the given sender only. SSM is nicer than ASM in that
+# it does not require a Rendezvous Point (RP) and other complexity, but is
+# often poorly supported in various network equipment.
+#stream /udp-multicast-ssmv6.ts src=udp://[2001:67c:29f4::32]@[ff3e::1000:0]:1234 pacing_rate_kbit=20000
+
+# udpstream takes src= inputs just like stream does, but instead of waiting
+# for TCP connections on ports, it immediately sends the packets out over UDP.
+# (As with UDP input, this probably only works well for TS mux.)
+#udpstream [2001:67c:29f4::50]:5000 src=http://pannekake.samfundet.no:9094/frikanalen.ts.metacube
+
+# udpstream takes pacing_rate_kbit= just like stream. None of the other options
+# make sense.
+#udpstream 193.35.52.50:5001 src=http://pannekake.samfundet.no:9094/frikanalen.ts.metacube pacing_rate_kbit=2000
+
+# IPv4 multicast output, to the given group. You can explicitly set the TTL
+# and/or multicast output interface, if the defaults do not suit you.
+#udpstream 233.252.0.1:5002 src=http://pannekake.samfundet.no:9094/frikanalen.ts.metacube ttl=32 multicast_output_interface=eth1
+
+# A type of HTTP resource that is not a stream, but rather just a very simple
+# document that a HTTP 204 response and nothing else. allow_origin= is optional;
+# if it is set, the response will contain an Access-Control-Allow-Origin header
+# with the given value, allowing the ping response to be read (and
+# differentiated from an error) from a remote domain using XHR.
+#
+# If you have a stream and a gen204 endpoint with the same URL, the stream takes
+# precedence and the ping endpoint is silently ignored.
+gen204 /ping allow_origin=*
+
+# TG16
+
+# For viewers -- production feeds
+stream /event.ts src=http://anakin.tg16.gathering.org:5004/anakin.ts backlog_size=104857600
+stream /event.flv src=http://anakin.tg16.gathering.org:5004/anakin.flv backlog_size=104857600
+
+stream /eventsd.ts src=http://han.tg16.gathering.org:5009/eventsd.ts backlog_size=104857600
+stream /eventsd.flv src=http://han.tg16.gathering.org:5009/eventsd.flv backlog_size=104857600
+
+stream /game.ts src=http://padme.tg16.gathering.org:5004/padme.ts backlog_size=104857600
+stream /game.flv src=http://padme.tg16.gathering.org:5004/padme.flv backlog_size=104857600
+
+stream /creativia.ts src=http://leia.tg16.gathering.org:5004/leia.ts backlog_size=104857600
+stream /creativia.flv src=http://leia.tg16.gathering.org:5004/leia.flv backlog_size=104857600
+
+
+# Servers - direct feed
+stream /anakin.ts src=http://anakin.tg16.gathering.org:5004/anakin.ts backlog_size=104857600
+stream /anakin.flv src=http://anakin.tg16.gathering.org:5004/anakin.flv backlog_size=104857600
+
+stream /padme.ts src=http://padme.tg16.gathering.org:5004/padme.ts backlog_size=104857600
+stream /padme.flv src=http://padme.tg16.gathering.org:5004/padme.flv backlog_size=104857600
+
+stream /luke.ts src=http://luke.tg16.gathering.org:5004/luke.ts backlog_size=104857600
+stream /luke.flv src=http://luke.tg16.gathering.org:5004/luke.flv backlog_size=104857600
+
+stream /leia.ts src=http://leia.tg16.gathering.org:5004/leia.ts backlog_size=104857600
+stream /leia.flv src=http://leia.tg16.gathering.org:5004/leia.flv backlog_size=104857600
+
+#stream /han.ts src=http://han.tg16.gathering.org:5004/han.ts backlog_size=104857600
+#stream /han.flv src=http://han.tg16.gathering.org:5004/han.flv backlog_size=104857600
+
+# Webcams
+stream /southcam.ts src=http://han.tg16.gathering.org:5004/southcam.ts backlog_size=104857600
+stream /southcam.flv src=http://han.tg16.gathering.org:5004/southcam.flv backlog_size=104857600
+stream /southcamlb.ts src=http://han.tg16.gathering.org:5006/southcamlb.ts backlog_size=104857600
+stream /southcamlb.flv src=http://han.tg16.gathering.org:5006/southcamlb.flv backlog_size=104857600
+stream /noccam.ts src=http://han.tg16.gathering.org:5005/noccam.ts backlog_size=104857600
+stream /noccam.flv src=http://han.tg16.gathering.org:5005/noccam.flv backlog_size=104857600
+
+# Test
+#stream /test.ts src=udp://@:1234 backlog_size=1048576
+stream /event.mp4 src=http://han.tg16.gathering.org:1994/event.mp4 backlog_size=104857600 force_prebuffer=750000
+
+stream /udp.ts src=udp://@:1234 backlog_size=1048576
+